Do it Yourself Repairs and Maintenance of Central Air Conditioner

Are you having troubles with your central air conditioner? Qualified air conditioning technicians typically handle repairs of conditioning systems. But, there is some easy repairs and maintenance that you can do yourself.  For instance, your conditioning system doesn't cool, what do you do? There are times where conditioning systems don't cool because it requires cleaning.

First, you are required to turn off the power to the unit: unplug it from the central electrical system. Then scrape leaves and debris away from the outdoor condenser.  Next, take away any protective grille or cover from the condenser's and use a sponge brush to clean dirt and debris from the fins and then vacuum the dirt and debris with a brush attachment, making certain that you don't damage the fins of your central air conditioner. You can also visit http://alcusfuel.com/central-air-conditioning-units-for-sale-long-island/ to know more helpful tips to repair your AC. 

After that detach and lift the top grille off the unit and if the fan is attached to the grille, make certain that you don't pull any wires loose. How about the inside unit? Well, you will have to rinse down the fins making sure that you protect the wiring and motor with plastic sheeting. Then, if desired, grease the motor making sure that you don't over lubricate.

Then, send the unit and test it. Making certain that one of the pipes that connect to the condenser is warm and the other is cool. If this is not the situation, you will require calling a central air conditioner technician. While cleaning your system, make sure that you evade straining the compressor by waiting at least five minutes before turning if off at the thermostat and turning it back on. To get the repair and maintenance services for your AC you can look at this web-site.

Well, what if the air conditioner doesn't turn on automatically? In this situation, you have to make sure that the thermostat is set to cool and below the current temperature. The conditioning system should be on a 240-volt circuit, so check your central electrical panel and any secondary circuit panels as there might be a tripped breaker of blown fuse.